Elta KM117TB User Manual download pdf (Page 5)

• Place the glass jug (10) under the water discharge opening (4).

• Use the red on/off switch (10) to switch the coffee machine on. The red HEATING control light

(18) will go red.

• When the brewing process has completed, use the red on/off switch (10) to switch the coffee

machine off. The HEATING control light (18) will go off.

• You can remove the glass jug (10) from the appliance.

• The machine is equipped with a keep-warm plate (6), which keeps the coffee in the jug warm. The

keep-warm plate remains switched on for as long as the coffee machine is switched on.

Use automatic programming to prepare your coffee

• Open the lid (1) and carefully fill the water from the jug into the water tank. You can read the water

level on the level display (8). Close the lid (1).

• Place the durable filter (2) or the 1x4 filter bags into the filter holder (3) and close them. If you are

using filter bags, do not forget to flap the filter’s edges closed.

• Use the measuring spoon (9) that came with the appliance to scoop the coffee powder into the

durable filter (2).

• Place the glass jug (10) under the water discharge opening (4).

• Press the PRO key (13) twice until the LCD display shows (16) SET TIMER.

• Use the HR key (17) and the MIN key (15) to set the start time for the brewing process. Press the

HR key (17) to set the desired hour and the MIN key (15) to set the minute. When done, press the

PRO key (13) for confirmation. Afterwards, the LCD display will show the current time again.

• Press the AUTO key (12) to activate automatic coffee preparation. The green TIMER control light

(14) goes on.

• At the pre-programmed time, the brewing process will begin automatically. The red HEATING

control light (18) goes on.

• After the brewing process has completed, use the red on/off switch (10) to switch off the coffee

machine. The HEATING control light (18) will go off.

• You can remove the glass jug (10) from the appliance.

• The machine is equipped with a keep-warm plate (6), which keeps the coffee in the jug warm. The

keep-warm plate remains switched on for as long as the coffee machine is switched on.

• If the coffee machine is not switched off manually, it will switch off automatically approx. 2 hours

after the automatic brewing process has finished. The LCD display will show the current time.

• You can cancel the programming at any time by pressing the AUTO key (12). In this case, the

green TIMER control light (14) will go off. If you press the AUTO key (12) again, the programming

will be reactivated.

• Pressing the red on/off switch (11) will switch on the appliance immediately, and the red

HEATING control light (18) will go on.

• You can readjust the programmed start time at any time by pressing the PRO key (13) twice.

When done, press the PRO key (13) again to return to the current time display.

CLEANING AND MAINTAINANCE

• You must follow the safety instructions thoroughly.

• Wipe the coffee machine with a damp cloth on a regular basis.

• Depending on how often the coffee machine is used, it must be descaled every 3 to 4 months,

using a commercial descaling agent. Follow the manufacturer’s instructions to dilute the agent and

apply 1-2 times. Go on to perform 2-3 cycles without any coffee.

• To clean the appliance, flip open the filter holder (3) and remove it sideways.

• The filter holder (3), the durable filter (2) and the glass jug (10) can be cleaned with running water

and some cleaning agent.

• Do not use scouring agents or sharp cleaning utensils.

• Under no circumstances should you use gas or solvents to clean the appliance.

TECHNICAL INFORMATION

Operating voltage : 230V~ 50 Hz

Power input : 1000 Watt

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has

occurred during production or transportation, please return the device to your dealer. In addition to

statutory legal rights, the purchaser has an option to claim under the terms of the following

guarantee:

For the purchased device we provide 2 years guarantee, commencing from the day of sale. During

this period we will remedy all defects free of charge, which can be demonstrably attributed to

material or manufacturing defects, by repair or exchange.

Defects which arise due to improper handling of the device and malfunctions due to interventions

and repairs by third parties or the fitting of non-original parts, are not covered by this guarantee.

7 8

approved

1 2 3 4 5 6 7 8 9 10 ... 22 23

Comments to this Manuals

No comments

Elta KM117TB User Manual Page 5

Comments to this Manuals